Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IP Communicator & CME 4.0

Hi All

Trying desperately to get IP Communicator and VT Advantage to work on new CME 4.0 system.

VT works fine when associated with hardphone but IPC does not show Video icon.

Video is enabled in ephone config and type is set to CIPC. I've reinstalled all software and removed windows firewall. Even tried it on different laptop with new install and new ephone config - same result - no video icon.

Any Ideas?

1 REPLY
Bronze

Re: IP Communicator & CME 4.0

Which ios version are you using? Official CIPC support with VTA began with CME 4.0.3 which is IOS 12.4(4)XC4 and later. Anything earlier than that and CIPC may not work.

Here are a few useful config links.

The required camera is a Cisco VT Camera, a video telephony USB camera.

Here are some useful links:

http://www.cisco.com/en/US/products/sw/voicesw/ps5662/products_white_pap

er0900aecd80422c95.shtml

The following link specifically states that only Cisco USB cameras are

supported:

http://www.cisco.com/en/US/products/sw/voicesw/ps5662/products_data_shee

t0900aecd8044de04.html

224
Views
0
Helpful
1
Replies
CreatePlease to create content