Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IP Communicator / Juniper SSL/VPN

For a CME project, client has a Juniper SSL/VPN running Java Secure Access Manager(JSAM). Client wants staff to use IP Communicator but cannot verify or document interoperability of IPComm w/ JSAM SSL/VPN. Any info is greatly appreciated

2 REPLIES

Re: IP Communicator / Juniper SSL/VPN

Here is some good information for you. If your SSL vpn is configured correctly, and your client on the remote can "talk" to the CME server, you should be fine.

http://www.cisco.com/en/US/products/sw/voicesw/ps5475/products_administration_guide_chapter09186a008020ad96.html

The Audio ports need to be open or defined back and forth as well as TFTP to and from CME. HTTP will also be needed for Services, etc.

HOpe this helps!

Hall of Fame Super Silver

Re: IP Communicator / Juniper SSL/VPN

COuple of my customer use Juniper SSL vpn and I have no issues with IP Communicator with CallManager (should be no different with CME).

Chris

663
Views
0
Helpful
2
Replies
CreatePlease login to create content