Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IP Communicator Problems

Have just installed IP Communicator onto Windows 2000 workstation but it doesn't load !!. I get a splash screen after running the audio tuning wizard andd there it hangs.

Does anybody have any ideas....please ?

Regards

scott.

13 REPLIES
Gold

Re: IP Communicator Problems

When you launch IP Communicator and get the slash screen, right click on the winow and select Preferences. Here, make sure that under Network Tab, you have the TFTP Server info updated

New Member

Re: IP Communicator Problems

I have verified that information is updated and correct as that was my first suspicion

Gold

Re: IP Communicator Problems

Can you run Error Reporting Tool and attach the output to this post ?

New Member

Re: IP Communicator Problems

Output from error reporting tool - it doesn't look good.

New Member

Re: IP Communicator Problems

Hi,

It doesn't get that far !!, I have a white box with a picture of a bloke using communicator on a laptop and thats it, it goes no further.

New Member

Re: IP Communicator Problems

Check for any ACL on CCM VLAN... Make sure that your laptop passes through the ACL and can access CCM.

Sheeraz

New Member

Re: IP Communicator Problems

This is from a desktop in my local lan - No ACL's apply

Gold

Re: IP Communicator Problems

looks like we have missed couple of things,

Version of CIPC

Do you have Full Administrator rights on this machine ??

New Member

Re: IP Communicator Problems

Version is 2.0.2

Yes local admin rights on Win2K workstaion in question.

Scott.

Silver

Re: IP Communicator Problems

Go to your Eventviewer and post any error you are getting at the time when you run CIPC.

New Member

Re: IP Communicator Problems

Nothing in Event Viewer in any catagory

Scott.

Silver

Re: IP Communicator Problems

Ok then run a sniffer (ethereal) see if CIPC is crashing before or after connecting to the Network.

Highlighted
Bronze

Re: IP Communicator Problems

182
Views
0
Helpful
13
Replies
CreatePlease login to create content