Does anybody have a sample config for enabling SIP on IP Communicator when talking to CME? I don't see "type CIPC" on the SIP side of CME (under voice register pool); also, is there anything special to be configured on the IP Communicator?
IP Phone ==VLAN 422=== Router ==VLAN 426===CCME Router
Here’s “why” ,”how”, “What happens if” to the commands used in SIP Phone Registration to CCME.
voice service voip allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip #### SIP Phones create Voip Dial-peers. so for SIP to SIP, SIP to H323 you need to allow the connections. SCCP phones create EFXS POTS dial-peer. By Default IP-IP call is blocked)(Random Fact). fax protocol pass-through g711ulaw modem passthrough nse codec g711ulaw sip bind control source-interface FastEthernet0/0.426 bind media source-interface FastEthernet0/0.426 ### Bind Control and media to the interface with the same IP Address on source-address x.x.x.x . Else you will run into problems when you try to register Phones over a Layer 3 Link. registrar server ### Needed for phone to register
voice register global mode cme ### Change mode to CME source-address 126.96.36.199 port 5060 ### Should be the same as bind control and media when you have InterVLAN Routing max-dn 10 max-pool 10 authenticate register ### Needed for the phone to authenticate with username password, in intervlan registeration setup tftp-path flash: ### All the config files for the phones will be stored here. create profile sync 0174426467043125 ### Make sure you enter this command everytime you make some changes.!!!!!! Very IMP!
voice register dn 1 number 1234 ### DN for the Phone voice register pool 1 id mac 0023.5E17.D275 ### Mac Address of the Phone trying to register. Which won’t be used an authentication method when registering in Intervlan register scenario type 7942 ### Make sure you have this in here.! Else SEP.config wouldn’t be created. number 1 dn 1 ### Assigning 1234 to line 1 on the phone username cisco password cisco ### Credentials the phone uses when it tries to register in case of intervlan.
*Oct 14 07:08:12.135: VOICE_REG_POOL: Created dial-peer entry of type 0 *Oct 14 07:08:12.135: VOICE_REG_POOL: Registration successful for 1234, registration id is 1 *Oct 14 07:08:12.143: VOICE REGISTER POOL-1 has registered. Name:SEP00235E17D275 IP:188.8.131.52 DeviceType:Phone
*Oct 14 07:08:12.143: VOICE_REG_POOL: Pool: service-control (reset type: 2) message sent to sip:email@example.com
*Oct 14 07:08:12.143: VOICE_REG_POOL: Contact matches pool 1 number list 1 *Oct 14 07:08:12.183: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg: Sent: SIP/2.0 100 Trying Via: SIP/2.0/UDP 184.108.40.206:5060;branch=z9hG4bK0ca509fe From: <1234>;tag=00235e17d2750005e833caa4-06d638ae To: <1234>;tag=EA0947C-241F Date: Thu, 14 Oct 2010 07:08:12 GMT Call-ID: firstname.lastname@example.org Server: Cisco-SIPGateway/IOS-12.x CSeq: 104 REGISTER Content-Length: 01234>1234>
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...