Some of our homeworkers are experiencing issues with their headset or handset they use with IPCommunicator.
They've said that there is an alert message at times that appears when closing down the ip communicator saying "can not save settings".
This means that when they next log on to the communicator the auto tuning wizard appears with a request to 'check audio settings' as 'some audio devices have never been configured to use with Cisco IP Communicator'.
When this happens the handset/headset, make/model option is not available from the drop downs.
We have had a user bring their laptop in and we have reinstalled all software, handset drivers etc. But then it happens again. I have to issue instructions on setting up their usb phone/headset from scratch.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...