Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Anonymous
N/A

IP Communicator traffic classification

Does IP Communicator classify/mark its own traffic in OS (Windows XP/7)?

If so, does enabling WMM on WLC/AP prioritize this traffic for wireless?  Even if the SSID is Bronze QoS on WLC?

Also - is there a way to verify QoS (actual traffic being classified) on the switch interface connected to the WLC?

  • IP Telephony
3 REPLIES
New Member

IP Communicator traffic classification

In regards to the verify QOS:

do a sh service-policy xxx on the switch, it will show you the packet count in each queue.

CIPC does not mark the QoS, this has to be classified on the switch in  your interface configuration  refer to http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/2_1/english/administration/guide/cag21ovr.html

Anonymous
N/A

IP Communicator traffic classification

sh service-policy not option with switch IOS I'm running.  I'm thinking a packet sniffer (wireshark) or something might be needed?

New Member

IP Communicator traffic classification

where are you running service policies in the network? 

392
Views
0
Helpful
3
Replies