Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

IP Communicator with VT

Hi All,

I am trying to enable th VT in my IP Communicator. The VT console says the IP Communicator is not present.

In the CCM->device->phone->IP Communicator MAC address, their is no option for enabling the Video.

My CCM version is 4.0.

How enable the VT for IP Communicator?

Will IP Communicator/VT work with VPN clinet?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: IP Communicator with VT

Sorry, I'll have to correct my previous post. To use VTA with IP Communicator, you must have CCM 4.1(3)sr1 or later. You can use VTA with 7900 phones starting with CCM 4.0(1)sr2a, but IP Communicator with VTA requires a minimum of 4.1(3)sr1. See the following link for confirmation.

http://www.cisco.com/en/US/products/sw/voicesw/ps5662/products_data_sheet0900aecd8044de04.html

Hope this helps.

Brandon

3 REPLIES

Re: IP Communicator with VT

VT Advantage requires a minimum of CCM 4.0(1)sr2a. Are you running this or higher? Which version of IP Communicator are you using. You need at least 2.0 to work with VTA.

Yes, IPC/VTA will work with a VPN client.

Hope this helps. If so, please rate the post.

Brandon

New Member

Re: IP Communicator with VT

IP Communicator 2.1.1.0 and VTAdvantage 2.0.2.0 with CCM 4.0(2a)sr1,

Re: IP Communicator with VT

Sorry, I'll have to correct my previous post. To use VTA with IP Communicator, you must have CCM 4.1(3)sr1 or later. You can use VTA with 7900 phones starting with CCM 4.0(1)sr2a, but IP Communicator with VTA requires a minimum of 4.1(3)sr1. See the following link for confirmation.

http://www.cisco.com/en/US/products/sw/voicesw/ps5662/products_data_sheet0900aecd8044de04.html

Hope this helps.

Brandon

226
Views
5
Helpful
3
Replies
CreatePlease to create content