IP Communicator

[luke.maxwell]

Hi,

Do you know how many Device licensing units IP Communicator uses on CallManager 5.1?

I have found the information for Cisco Unified Mobile Communicator which is 1 but not for IP Communicator.

Here is the list I have.

Cisco Unified Presence (user) 1

Cisco Unified Mobile Communicator 1

Cisco Unified IP Phone 7902G 1

Cisco Unified IP Phone 7905G 2

Cisco Unified IP Phone 7906G 2

Cisco Unified IP Phone 7910 2

Cisco Unified Mobility 2

Cisco ATA 186 Analog Telephone Adapter 2

Cisco Unified IP Phone 7911G 3

Cisco Unified IP Phone 7912G 3

Cisco Unified IP Conference Station 7936 3

Cisco Unified Wireless IP Phone 7920 (no battery) 4

Cisco Unified Wireless IP Phone 7921 (no battery) 4

Cisco Unified IP Phone 7940G 4

Cisco Unified IP Phone 7941G 4

Cisco Unified IP Phone 7941G-GE 4

Cisco Unified IP Phone 7960G 4

Cisco Unified IP Phone 7961G 4

Cisco Unified IP Phone 7961G-GE 4

Cisco Unified IP Phone 7970G 5

Cisco Unified IP Phone 7971G 5

Cisco Unified IP Phone 7985G 6

Third-party SIP device (basic) 3 (third-party)

Third-party SIP device (advanced) 6 (third-party)

Thanks

Luke

[Majdi Harb · Accepted solution]

Hi Luke

yes Cisco IP Communicator Consumes 3 units per Device not 1.

hth

/majdi

[luke.maxwell]

Hi Majdi,

Do you know where I can find some supporting documentation which explains this?

Thanks

Luke

[Majdi Harb]

i usually use the License Unit Calculator in CCM admin to get the number of devices units

System--> Licensing--> License Unit Calculator

majdi

[Rob Huffman]

Hi Luke,

I used to have a link to an excellent pdf that showed that IP Communicator used 3 DLU's as Majid has nicely noted :) Of course this link no longer works so I am attaching a different pdf (see page 18).

Hope this helps!

Rob