Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

IP connectivty lost after initiating voice call

Hi

I was wondering if anyone can help?

We have a remote site connected to our corporate network using BGP over a 100meg leased line. We have no issue passing data over the link e.g. FTP traffic etc. When we  place a single voice call over the same link it connects then within 10-20secs we lose IP connectivity and the BGP peering  We have replaced the BGP peering with static routes with the same result.

cheers

Kev

1 REPLY

Re: IP connectivty lost after initiating voice call

Do you mean you have the same result i.e link dropping without any dynamic routing and just using static routes, to me that sounds like a layer 2 issue, what sort of link is it?

Sent from Cisco Technical Support iPhone App

Please remember to rate useful posts, by clicking on the stars below.

139
Views
0
Helpful
1
Replies
CreatePlease to create content