Hi, I have two sites - HUB with static WAN IP and Spoke with WAN IP from DHCP. Spoke site connects to Hub via ezvpn configuration. At Spoke site there is one ip phone in voice vlan that has VPN connectivity to HUB with CME. Phone registers correctly and can call phones at HUB Site but with one way audio (I can't hear anything from HUB side - I could hear only voice from Spoke side at HUB Phones). I created also static nat: ip nat inside source static IPPHONE_IP interface loopback10000
but still I have only one way audio.. even I could connect to phone's internal http server and so ;(
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...