The phone has been configured to connect via vpn to the cme 8.6. All was well, the phone rang and recorded. After that, the phone has been moved to another city and for him to change the number (dn). After that, the phone has successfully connected via vpn, but the check does not
not registere.In debug shows that the phone is registered, a few minutes later disconnected.
Jul 20 19:10:22.892: TFTP: Looking for CTLSEP24B657B14ACD.tlv
Jul 20 19:10:23.156: TFTP: Looking for ITLSEP24B657B14ACD.tlv
Jul 20 19:10:23.444: TFTP: Looking for ITLFile.tlv
Jul 20 19:10:23.764: TFTP: Looking for SEP24B657B14ACD.cnf.xml
Jul 20 19:10:23.768: TFTP: Opened flash:/its/vrf1/SEP24B657B14ACD.cnf.xml, fd 0, size 1779 for process 396
Jul 20 19:10:24.572: TFTP: Finished flash:/its/vrf1/SEP24B657B14ACD.cnf.xml, time 00:00:00 for process 396
Jul 20 19:10:26.932: TFTP: Looking for English_United_States/mk-sccp.jar
Jul 20 19:10:27.604: TFTP: Looking for United_States/g3-tones.xml
Jul 20 19:10:28.888: New Skinny socket accepted  from 0, sub 1 (3 active)
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.