Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IP Phone clicking noise

I have an new issue with our IP phones at one of our campuses that are making a clicking noise all of a sudden - this site has been up and running on IP phones for over a year and nothing in the configurations have changed. The callers on the remote end do not hear it though. We have Auto QoS in place and have a large metro-e pipe out of this location so i do not think it is QoS related but.......

- any ideas would be appreciated

Thanks

2 REPLIES
Bronze

Re: IP Phone clicking noise

I had a similar issue a couple of years ago that disabling VAD corrected. Might be worth a try.

New Member

Re: IP Phone clicking noise

Thanks - Actually it was one of the three PRIs trunked into that site. It was showing slips along with tons of input errors and CRCs on the serial interface counters. After getting the LEC on the phone they confirmed that there was an issue at the CO and got it resolved pretty quickly. Until they resolved it I just moved that PRI to the bottom of the outbound Route Group and had the LEC drop it to the bottom on their inbound hunt list to minimize impact

204
Views
0
Helpful
2
Replies