10-04-2014 04:16 AM - edited 03-17-2019 12:25 AM
Dears,
I want to know the load files for IP phone 3905 in the router as I am looking for the load file in the router flash but I couldn't locate them, attached is the output for the Dir of the router.
Thanks
Solved! Go to Solution.
10-04-2014 09:18 AM
Hi,
you need to have Basic CME and GUI files .
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmeinstl.pdf
you can download the same
http://software.cisco.com/download/release.html?mdfid=277641082&release=7.1.0.0&softwareid=282786567&sortparam=
regds,
aman
10-04-2014 09:18 AM
Hi,
you need to have Basic CME and GUI files .
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmeinstl.pdf
you can download the same
http://software.cisco.com/download/release.html?mdfid=277641082&release=7.1.0.0&softwareid=282786567&sortparam=
regds,
aman
10-06-2014 01:06 AM
Dear
Thanks
Some of the IP PHONES 3905 with CME 9.1 stuck in registering, while some other phones 3905 are registered, when I do show logging I don't see any unregistered request for the 3905 sip phones
10-07-2014 03:25 AM
Kindly send us the running configuration.
Also, under voice service voip do "create profile", collect the following debugs and post it here:
Debug tftp events
Debug ccsip messages
10-07-2014 04:23 AM
Dear aseAnand
Attached are as requested.
nobody was answering to this post becz it was marked as answered so that the reason i opened a new post either you can contribute on this post https://supportforums.cisco.com/discussion/12318801/cme-phones-not-upgrading
OR we can continue on this post
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: