Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Ip Phone Firmware upgrade

Dears,

I want to know the load files for IP phone 3905  in the router as I am looking for the load file in the router flash but I couldn't locate them, attached is the output for the Dir of the router.

 

Thanks

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Hi, you need to have Basic

Hi,

 

you need to have Basic CME and GUI files .

 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmeinstl.pdf

 

you can download the same 

http://software.cisco.com/download/release.html?mdfid=277641082&release=7.1.0.0&softwareid=282786567&sortparam=

regds,

aman

4 REPLIES
VIP Purple

Hi, you need to have Basic

Hi,

 

you need to have Basic CME and GUI files .

 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmeinstl.pdf

 

you can download the same 

http://software.cisco.com/download/release.html?mdfid=277641082&release=7.1.0.0&softwareid=282786567&sortparam=

regds,

aman

New Member

Thanks

 

Dear

Thanks

Some of the IP PHONES 3905 with CME 9.1 stuck in registering, while some other phones 3905 are registered, when I do show logging I don't see any unregistered request for the 3905 sip phones

New Member

Kindly send us the running

Kindly send us the running configuration.

Also, under voice service voip do "create profile", collect the following debugs and post it here:

Debug tftp events

Debug ccsip messages

New Member

Dear aseAnand Attached are as

Dear aseAnand

 

Attached are as requested.

nobody was answering to this post becz it was marked as answered  so that the reason i opened a new post either you can contribute on this post  https://supportforums.cisco.com/discussion/12318801/cme-phones-not-upgrading

OR  we can continue on this post

 

97
Views
0
Helpful
4
Replies
CreatePlease login to create content