10-04-2014 04:16 AM - edited 03-17-2019 12:25 AM
Dears,
I want to know the load files for IP phone 3905 in the router as I am looking for the load file in the router flash but I couldn't locate them, attached is the output for the Dir of the router.
Thanks
Solved! Go to Solution.
10-04-2014 09:18 AM
Hi,
you need to have Basic CME and GUI files .
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmeinstl.pdf
you can download the same
http://software.cisco.com/download/release.html?mdfid=277641082&release=7.1.0.0&softwareid=282786567&sortparam=
regds,
aman
10-04-2014 09:18 AM
Hi,
you need to have Basic CME and GUI files .
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmeinstl.pdf
you can download the same
http://software.cisco.com/download/release.html?mdfid=277641082&release=7.1.0.0&softwareid=282786567&sortparam=
regds,
aman
10-06-2014 01:06 AM
Dear
Thanks
Some of the IP PHONES 3905 with CME 9.1 stuck in registering, while some other phones 3905 are registered, when I do show logging I don't see any unregistered request for the 3905 sip phones
10-07-2014 03:25 AM
Kindly send us the running configuration.
Also, under voice service voip do "create profile", collect the following debugs and post it here:
Debug tftp events
Debug ccsip messages
10-07-2014 04:23 AM
Dear aseAnand
Attached are as requested.
nobody was answering to this post becz it was marked as answered so that the reason i opened a new post either you can contribute on this post https://supportforums.cisco.com/discussion/12318801/cme-phones-not-upgrading
OR we can continue on this post
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide