I have upgraded the cisco 7940/7960 IP phone firmware (using the file cmterm-7940-7960-sccp.8-0-7.exe) on the CCM, however when I checked the firware version on the IP phone its displaying the following..
App Load ID:
Boot Load ID:
What does this mean.... has the phone firmware got upgraded or not??
can someone give ur inputs..
(Note: I'm trying the upgrade the IP phone firmware of 7940G IP phone on CCM with version 4.2.1)
You can't go straight from 3.1 to 8.0 FW. You need to apply progressive upgrades as indicated the in FW release notes. I don't have the minimal sequence information but others should be able to to help :)
Also I believe that with CM 4.2.1 there is a recommend FW version you should use, again, not sure which one, sorry!
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.