We are in the process of upgrading UCM 5.1 to 7.1 and are in the process of updating the firmware of all of our phones. Is there a way to report which firmware version is running on each of the phones?
I thought that Operations Manager would discover this information but I haven't been able to find anything. Do people use 3rd party apps to discover and report ip phone information? If so, any recommendations?
Very interested in your reporting app, as long as it is a scripted language. We recently ran into a issue where we were pushing out firmware version 8.5(3) and found that anything prior to 8.3(3) would not upgrade and had to be upgraded to 8.5(2) first. We were are in the process of scripting an SSH call to the phones to retrieve this information so we can make sure that all of our phones are upgraded to the latest firmware.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...