Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

IP Phone Logo - Is it possible apply logo only specific floor

Hi,

My Customer developed the logo for any IP Phones (79xx), and would like know is possible apply this configuration in the first time only about specific floor. (For example 4 rd floor)

                  

|_______________ | n xx floor

|_______________ |

|_______________ |

|_______________ |

|_______________ |

|_______________ |

|_______________ |

|_______________ | 2 th floor

|_______________ | 1st floor

This environment there are only TFTP server and we use CUCM 8.6.2

Thanks,


Wilson

2 ACCEPTED SOLUTIONS

Accepted Solutions

IP Phone Logo - Is it possible apply logo only specific floor

Hi,

All the images on the TFTP server are shared, so all phones would have access to the images, unless you deployed multiple TFTP Servers with different images. Also you would have to manually go round all the phones on each floor.

For this requirement I strongly recommend PhoneView from UnifiedFX (http://www.unifiedfx.com), not only can oyu push background images out remotely in bulk, you can filter by a lot of different criteria. In this case you could filter to all the phones connected to the relevant access switches on each floor and then remotely update the corresponding background image.

Kind Regards.

Stephen Welsh

Cisco Employee

IP Phone Logo - Is it possible apply logo only specific floor

The same you've been told by Carlo and myself on this thread

https://supportforums.cisco.com/thread/2243094?tstart=0

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
3 REPLIES

IP Phone Logo - Is it possible apply logo only specific floor

Hi,

All the images on the TFTP server are shared, so all phones would have access to the images, unless you deployed multiple TFTP Servers with different images. Also you would have to manually go round all the phones on each floor.

For this requirement I strongly recommend PhoneView from UnifiedFX (http://www.unifiedfx.com), not only can oyu push background images out remotely in bulk, you can filter by a lot of different criteria. In this case you could filter to all the phones connected to the relevant access switches on each floor and then remotely update the corresponding background image.

Kind Regards.

Stephen Welsh

Cisco Employee

IP Phone Logo - Is it possible apply logo only specific floor

The same you've been told by Carlo and myself on this thread

https://supportforums.cisco.com/thread/2243094?tstart=0

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

IP Phone Logo - Is it possible apply logo only specific floor

Hello,

2Ring PHONE SERVICES dispose with such feature.

In other words, it is possible to specify the group/floor based on extensions (IPs will be added in some of oncoming releases).

Then you are able to send the background picture to this groups within the app GUI. Also, it means that the pictures don't have to be directly at the TFTP server, but must be available at PHONE SERVICES server.

If you are interested in, just follow the link to get more info: http://www.2ring.com/NewJuice

Regards,

Martin

185
Views
0
Helpful
3
Replies
CreatePlease to create content