12-29-2013 03:09 AM - edited 03-16-2019 09:02 PM
dears,
need some help in the folowing
while making outgoing calls , hear some kind of disturbance sound
attached debug voice ccapi
12-29-2013 03:57 AM
Please share your router config with us here.
12-29-2013 04:01 AM
12-29-2013 04:58 AM
incoming calls are working or not ? what do you mean by disturbance sound ?
Please post outputs of below debugs
debug vpm signal
debug voip dialpeer inout
Please rate if post is useful.
12-29-2013 05:19 AM
12-29-2013 11:26 AM
Hi Edwin,
The called number 90566919592 is matching 7 pots dial-peers(1009-1016) which are pointing to different 7 different FXO ports. Now i guess your analog pstn line is single channel.If you need to test call on this PSTN connection , i would suggest below.
Create a new explicit pots dial-peer and point it to a port on which you have connected your analog PSTN line.
dial-peer voice xxxx pots
corlist outgoing domesticcalls
description "Calls to Mobile carrier - Saudi Arabia"
destination-pattern 90566919592
port 0/3/3
forward-digits 10
no sip-register
Thanks
Manish
Rate all the helpful post.
12-29-2013 09:48 PM
Hi manish,
But the call was going through 0/1/0 where the pstn in connected right
12-30-2013 02:24 AM
So where is the problem ? Is you PSTN link works fine with port 0/1/0 ?
I was going through debug that you shared for called number 90566919592 which is matching destination-pattern 905[0-9]....... and that is not pointed to 0/1/0 port.
Thanks
Manish Prasad
Rate all the helpful post.
12-30-2013 04:26 AM
Dears,
The issue is solved, the whole problem was with the cabinet could be earthing.
we removed the UC520 from the cabinet , the calls are going out and in
just resolved issue by reading the below forum
https://supportforums.cisco.com/thread/99219
thanks everyone for the support
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide