Re: IP phone not able to make incoming and outgoing calls
The called number 90566919592 is matching 7 pots dial-peers(1009-1016) which are pointing to different 7 different FXO ports. Now i guess your analog pstn line is single channel.If you need to test call on this PSTN connection , i would suggest below.
Create a new explicit pots dial-peer and point it to a port on which you have connected your analog PSTN line.
dial-peer voice xxxx pots
corlist outgoing domesticcalls
description "Calls to Mobile carrier - Saudi Arabia"
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...