I have a Cisco 7945G phone that I have setup with a VPN profile so it can be used remotely. This device was configured properly, tested at multiple locations and implemented. This device worked fine for several months but recently the end user has moved into a new house and now has a new service provider (Verizon FIOS). Now for some reason the phone will not get past the Registering process and doesn't prompt her for her VPN credentials. Nothing has changed with the phone so I am assuming it is either her new ISP or the Modem/Router they provided her. The device gets an IP address via DHCP from her home network but then just sits as the registering screen. She is able to use the Anyconnect client on her laptop to connect to our SSL VPN that way so I don't think the provider is blocking VPN traffic; but there is something that is stoping the phone from getting out.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...