Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

IP Phone register

Please any one till me how IP phone power by POE and connected to the normal router (Not voice enable) can register to main site's call manager

7 REPLIES
Hall of Fame Super Gold

Re: IP Phone register

It gets an address via DHCP or static config, then contacts the call manager via TFTP. It downloads a config file then registers.

hope this helps, please rate post if it does!

Community Member

Re: IP Phone register

Thanks

Do I need any IOS voice & DSP for Phone to connected to main site

Hall of Fame Super Gold

Re: IP Phone register

You don't need any voice feature except on the router that is connected to the phone network, sometime called voice gateway.

What you may need, if the remote phones are connected via slow links, is QoS configuration on the routers that are connecting the slow links.

Thanks for the nice rating and good luck!

Community Member

Re: IP Phone register

Thanks for helpfull reply

My last question is i need IOS voice & DSP for my router , I only connected to main site via WAN only no PSTN needed in this setup

Thanks

Hall of Fame Super Gold

Re: IP Phone register

Hello,

As I said above, generally you do not need voice features and DSP except on a router that is connected the the telephone network, if any.

Community Member

Re: IP Phone register

Many thanks to you

Community Member

Re: IP Phone register

just set option 150 on the router to point to your call manager

145
Views
5
Helpful
7
Replies
CreatePlease to create content