Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

IP phone ring at the same time when call in the number

Hi,

I have 6 ip phones and one extension 7100. My problem is as follows. Could anyone know what feature is suitable for the following condition ?

If some customer call in 3050 7100, the 6 ip phones will ring at the same time. Then one of the ip phone answer the call. If another call in 30507100 again, the 6 ip phones will be notified call waiting. Then the other one can answer the call. As a result, we can answer 4 incoming calls at the same time.       

Thanks in advance

Leung Che Man

Everyone's tags (6)
2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Super Bronze

IP phone ring at the same time when call in the number

A hunt pilot/list/group won't offer additional calls to a phone already on a hunt-delivered call (e.g. no call waiting). The easiest way to accomplish this is to just share the 7100 DN across all six phones. Set the busy trigger to four (4) on all of the line appearences.

Hall of Fame Super Red

IP phone ring at the same time when call in the number

Hi Leung,

Yes, this is the proper config my friend +5 to both Jonathan and Dass for their

great tips here!

As you have discovered, you can only Call Forward "Primary" Lines (Line 1) via

the IP phones. This is covered in the following Bug/Enhancement;

CSCdr03425 - AVVID: Allow additional line appearances to be forwarded from phone

Description

A user cannot not forward non-primary line appearances from the phone

Details

First Found in:                          (9)

2.3(1),3.0(7),2.4(2b),4.2,3.1(3a)

3.3,7.1(2),5.1,6.1(3)

Status:

Open

Last Modified:

Apr 17,2012

Product:

Cisco Unified Communications Manager (CallManager)

Platform:

Dependent

Severity:

6 - enhancement

There is a third party product that will do what you want

IPPhone callForwarder

This  new version brings to the user the ability of defining and setting the  call forwards from the IP Phone. When selecting the IP Phone  callForwarder service, a menu with all available lines will appear.  After selecting the line the user wishes to set the forward on, a new  menu containing the forward definitions will show on screen. Only those  forwarding parameters definied by the Administrator will be displayed.  These parameters will show the actual forward destination. The user can  then set any of these callForwards.

From this good link;


http://www.myvoipsource.org/open-source-tools/ip-phone-callforwarder/

Or you can Call Forward via ccmuser or ccmadmin

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

6 REPLIES
Community Member

IP phone ring at the same time when call in the number

Hi ,

We use CUCM 8.5 with C2911 voice gateway.

IP phone CP7965

Thanks

Leung che Man

Community Member

IP phone ring at the same time when call in the number

Hi Leung,

You can configure Hunt group for this scenario and in the line group you can select for Broadcast. This will make all the phones ring and whoever is available can pick up the call.

For more detail on the Hunt Group Configuration you can follow the below link

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmcfg/b03lngrp.html#wp1062234

Thanks,

Dass

Please rate useful posts

VIP Super Bronze

IP phone ring at the same time when call in the number

A hunt pilot/list/group won't offer additional calls to a phone already on a hunt-delivered call (e.g. no call waiting). The easiest way to accomplish this is to just share the 7100 DN across all six phones. Set the busy trigger to four (4) on all of the line appearences.

Community Member

IP phone ring at the same time when call in the number

Thanks all of your information,

Can I know whether the following setting is correct ?

Phone 1, line 2 - 7100

Phone 2, line 2 - 7100

Phone 3, line 2 - 7100

Phone 4, line 2 - 7100

Phone 5, line 2 - 7100

Phone 6, line 2 - 7100

(Max Call = 6 and Busy Trigger = 4)

By the way, How can I activate the CFwAll in the line 2 as they are grey in key. The line 1 of Phone 1-6 are the individual DN of each phone.

Thanks

Leung Che Man

Hall of Fame Super Red

IP phone ring at the same time when call in the number

Hi Leung,

Yes, this is the proper config my friend +5 to both Jonathan and Dass for their

great tips here!

As you have discovered, you can only Call Forward "Primary" Lines (Line 1) via

the IP phones. This is covered in the following Bug/Enhancement;

CSCdr03425 - AVVID: Allow additional line appearances to be forwarded from phone

Description

A user cannot not forward non-primary line appearances from the phone

Details

First Found in:                          (9)

2.3(1),3.0(7),2.4(2b),4.2,3.1(3a)

3.3,7.1(2),5.1,6.1(3)

Status:

Open

Last Modified:

Apr 17,2012

Product:

Cisco Unified Communications Manager (CallManager)

Platform:

Dependent

Severity:

6 - enhancement

There is a third party product that will do what you want

IPPhone callForwarder

This  new version brings to the user the ability of defining and setting the  call forwards from the IP Phone. When selecting the IP Phone  callForwarder service, a menu with all available lines will appear.  After selecting the line the user wishes to set the forward on, a new  menu containing the forward definitions will show on screen. Only those  forwarding parameters definied by the Administrator will be displayed.  These parameters will show the actual forward destination. The user can  then set any of these callForwards.

From this good link;


http://www.myvoipsource.org/open-source-tools/ip-phone-callforwarder/

Or you can Call Forward via ccmuser or ccmadmin

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

Community Member

IP phone ring at the same time when call in the number

Thanks all,

I config the following in DN 7100 of each IP phone. Then, the customer accept the share line after testing.

(Max Call = 6 and Busy Trigger = 6)

Cheers

Leung CHe Man

2540
Views
10
Helpful
6
Replies
CreatePlease to create content