Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IP Phone to Analog Phone

Hi,

I am using Cisco Unity Call Manager 5.1 (3),and the Voice gateway is Cisco2821,and I have 200 IP 7940 G phones nad the PSTN is terminated to cisco 2821 router where the same E1 PRI is also terminated.

Now the problem is from any IP phone to IP phone it is working fine,but when I make a call from IP phone to PSTN phone,the call is landing and the PSTN user pick up call and He/She is able to listen the voice,but the IP phone user is not able to listen the voice.

What could be the problem? I am new to IP telephone.

I have to solve this escalation.

I do not have the configuration.

Thanks and Regards,

S.Venkataraman.

2 REPLIES
Silver

Re: IP Phone to Analog Phone

Hi,

A couple of quick things...

Have you bound either H323 or MGCP to a specific interface on your router?

Are there any access lists in between your voice gateway and your phones?

Have you got voice rtp send-recv configured on your gateway?

Cheers,

Tim

Silver

Re: IP Phone to Analog Phone

Sorry should also include link to this doc! good place to start.

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a008009484b.shtml

Cheers,

Tim

147
Views
0
Helpful
2
Replies
CreatePlease to create content