IP Phones compatible with CUCM 8.6

[parthasarathym]

Hi All,

We are using certains Phones like 7902,7905,7912,7911,7936,7940,7942,7960,7960 + 7914 module,ATA  187,186,188 we are planning to upgrade our CCM 4.1 to 8.6.

i want to know whether all these models will work in CUCM 8.6.

Partha

[ronpatel]

Hi,

There is no document which will show you list ip Phone suppoted by perticulat CUCM. You will have to manually check the firmware of above phones to know the minimum supported CUCM.

SRND 8 has ip phone supported in CUCM 8.X

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/endpnts.html#wpmkr1205118

Regards

Ronak patel

[Chris Deren]

All listed phones work fine with CUCM 8.6. Typically Cisco does not discontinue ability of registering any phone models even after they are EOL/EOS.

HTH,

Chris

[Rob Huffman]

Hi Partha,

You can see the support for these models in 8.6 in the

"Default Loads" section here;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf

Cheers!

Rob

[l.checkon]

All the phones work on 8.6. I would strongly suggest that you upgrade the phone firmware of all the phones while study are stroll registered to ccm4. This way when you do upgrade you will not have any surprises with phones not working due to not being able to upload the new firmware. You will need to look at each phone and check the firmware upgrade path.

Sent from Cisco Technical Support iPad App