Hi, I'm assuming the user uses the same softphone while he's into the network or over the VPN and always register with the same CUCM cluster. For this particular case you can use Device Mobility feature, you can get the detail here:
If the user uses Extension Mobility feature you can simply put the PSTN route pattern partition on the user device CSS (not on the line CSS) so while he's on mobile he can't access the PSTN route pattern.
If the user uses shared line between the hardphone and the softkey I'm not sure if the Device Mobility can help you on this.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...