The Document palette provides three types of Document steps, which are usually used in the following order: source, transformation, and output steps.
Source steps?Used to define a document object using different parameters, such as a URL or a file name. Three Document steps are Source steps:
Create File Document
Create URL Document
XSL Transform Document
Source steps define the parameters for a document variable but do not read data at the time they execute. You can use the Cache step to cause the system to obtain and store the document defined by a Source step. Otherwise, the document is read when passed to a transformation or output step.
Transformation steps?Used to process an input document and store the results in an output document. The output document can use the same variable as the input document. Three Document steps are Transformation steps:
Create XML Document
Text Substitution for Keywords
Output steps?Used to direct a document to an output destination, such as a URL or file system. Two Document steps are Output steps:
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...