Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

IPMA and EM

I have the following:

IPMA and the manager has a 7970

When I configure the manager with a device name (SEPXXX) it works, I have the icons on the screen.

However when I try to configure the manager to use a device profile, I never see the icons on the screen. I restarted the IPMA service several times, but it seems that when I select the device profile it wont work.

According to the manual EM should work for the managers.

I am using CM 6.1.2

Any idea?

Thanks,

JH

2 REPLIES
Anonymous
N/A

Re: IPMA and EM

check for the following configurations:

- "Mobile Manager" check box is checked at Manager Configuration Page.

- EM Device Profile is selected in the drop down for "Device Name/Profile" (and not the static phone) at Manager Configuration Page.

- The EM Device Profile is configured with Softkey template for IPMA Standard Manager.

- The EM Device Profile is subscribed to IPMA Phone service.

Silver

Re: IPMA and EM

This was all correct, but finally after a reboot of CM it worked.

when making a small change you have to restart the IPMA service, and after many restarts it seems completely unstable, only a reboot clears up the mess.

I shall make an upgrade to 6.1.3 to see if IPMA is more stable.

Thanks,

Jan

124
Views
0
Helpful
2
Replies