am running cm 7.1.5 and am getting exactly the same errors. My users are perfectly configured. I also had my configs checked by several people including a Cisco TAC engineer. I did a sniff on the phone and it looks like appon the http get request when selecting te manager service the server is sending a blank page back.
I am very frustrated as this is the last issu on my issu log for this customer before I can sign off the project. It is also one of those types of services that is installed at the CEO's phone.
What is interesting about the sniff is that the http get request is returning a 100 OK. The "HTTP File Error" message is displayed in the status line of the phone which gets updated via skinny messages and not http. The TCP flow to port 8080 there for ends without any errors
Just saw my old comment here and wanted to point out the solution at the time. CUCM ver 7.1.5 had a bug. The IPMA application user automaticall derives a password from the database secret password. My password had an "&" in that caused the problem. I only had to change this application account password and IPMA worked like a charm.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...