Is it possible to configure the PC port settings of an IP phone - remotely

[astanislaus]

At the moment the PC port settings in all 400 phones at various sites of this customer are all 100 / Full. They did this for a reason during implementation when they had some odl PCs.

Now they have installed new PCs in these 400 sites and the new NICs in these PCs, all come configured for AUTO SPEED and AUTO MODE.

Now the PCs are seeing lots of collisions and the customer wants to change the PC port settings on all the 400 phones remotely to AUTO / AUTO.

Is it possible to change these settings remotely.

The web browser to the phone only lets you look at things.

[KonradStepniewski]

There is no option to do it from CUCM but check this link maybe you can find it helpful. It's external software mentioned for remote changes:

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&topicID=.ee6c829&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd41177