Is it possible to enable mixed mode in CUCM 9.1.2 unrestricted?
currently we are running CUCM 9.1.2 Unrestricted, it does not support SRTP, secure signalling etc. I would like to use LSCs issued by my own CA to authenticate our phones against RADIUS with EAP-TLS. As far as I understand how CAPF works, I need to enable mixed security mode in my cluster and create CTL (or I only need to choose "Update CTL file" option in Cisco CTL Client to create new CTL and upload it to CUCM?). Is it possible to do that if my cluster is unrestricted? Do I still need to buy bunch of USB Tokens to sign the CTL?
Thank you for the answer, in my case I only need to distribute LSCs to the phones for 802.1x authentication. As far as I understand, it is possible to just update the CTL file with Cisco CTL Client utility.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...