Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

is it possible to specify a different URL directory service for a lobby phone?

Hi,

 

We have a 7841 set up as lobby phone. Now we want to allow visitors to search corporate director for extensions only. I can create another directory server to contain just the extensions. But i am not quite sure if we can specify different URL for this phone only, other phones can access the URL with full information.

 

Please advise,

 

thank you

 

 

dangquangminh@vnpro.org CCIE#11897 6016 Tillsdows Dr, Mississauga,ON Canada L5N4M3
  • IP Telephony
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

You could try creating two

You could try creating two different ephone templates - one for normal phones and one for lobby phones:

 

ephone-template  1
url services 1 http://x.x.x.x/directory1.xml Directory
!
ephone-template 2
url services 1 http://x.x.x.x/directory2.xml Directory
!
ephone 1
description Corporate Phone
ephone-template 1
!
ephone 2
description Lobby Phone
ephone-template 2

 

I haven't tested this, but I see no reason why it shouldn't work. Try it out and let us know.

 

Cheers

Sean

 

9 REPLIES
Cisco Employee

You need to mention what call

You need to mention what call control you use, and version.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

CME 10.0. Thanks Java 

CME 10.0.

 

Thanks Java

 

dangquangminh@vnpro.org CCIE#11897 6016 Tillsdows Dr, Mississauga,ON Canada L5N4M3
New Member

You could try creating two

You could try creating two different ephone templates - one for normal phones and one for lobby phones:

 

ephone-template  1
url services 1 http://x.x.x.x/directory1.xml Directory
!
ephone-template 2
url services 1 http://x.x.x.x/directory2.xml Directory
!
ephone 1
description Corporate Phone
ephone-template 1
!
ephone 2
description Lobby Phone
ephone-template 2

 

I haven't tested this, but I see no reason why it shouldn't work. Try it out and let us know.

 

Cheers

Sean

 

New Member

the 7841 is running sip so i

the 7841 is running sip so i put following configs.

!

voice register global
 mode  cme
 url directory http://192.9.200.83/dir/main.xml
 !

voice register template  2
 url AppDialRule http://192.9.200.83/dir/main2.xml
 url DirLookupRule http://192.9.200.83/dir/main2.xml
!

!
voice register pool  2
 busy-trigger-per-button 1
 id mac 00E1.6DBA.8EC9
 type 7841
 number 1 dn 2
 template 2
 presence call-list
 dtmf-relay rtp-nte
 username 4007 password 4007
 description Lobby Floor
 codec g711ulaw
 no vad
!

the phone still use the directory pointed out in global mode, not the one in template 2. Any idea?

Thank you Sean

 

 

dangquangminh@vnpro.org CCIE#11897 6016 Tillsdows Dr, Mississauga,ON Canada L5N4M3

Did you try resetting the

Did you try resetting the phone?

Please remember to rate useful posts clicking on the stars below. Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo. ___________________________________________ LinkedIn Profile: do.linkedin.com/in/leosalcie
New Member

yes i did reset the phone

yes i did reset the phone several times. also did no create profile and create profile in voice register global.

it seems that the phone only receive the url directory defined in global service mode, not the one in the template.

 

thank you for your time.

 

 

dangquangminh@vnpro.org CCIE#11897 6016 Tillsdows Dr, Mississauga,ON Canada L5N4M3
New Member

As this 7841 is a kind of new

As this 7841 is a kind of new phone, we have following configs for the pool-type. I don't know if this is really matter.

 

!
voice register pool-type  7841
 xml-config maxNumCalls 6
 xml-config busyTrigger 6
 xml-config custom sshAccess 0
 phoneload-support
 telnet-support
 num-lines 4
 description Cisco IP Phone 7841
 reference-pooltype 6941
!

 

dangquangminh@vnpro.org CCIE#11897 6016 Tillsdows Dr, Mississauga,ON Canada L5N4M3
New Member

turn off the command url

turn off the command url directory in voice register global and everything works fine.

 

thank you

 

 

dangquangminh@vnpro.org CCIE#11897 6016 Tillsdows Dr, Mississauga,ON Canada L5N4M3
New Member

Great news! I was going to

Great news! I was going to set up a lab today but this saves me the trouble :)

136
Views
0
Helpful
9
Replies
This widget could not be displayed.