Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

is it possible to transfer a voip call to fxs analog ?

Using CME 4.1

I receive voip call on a ip phone, I can transfer the call successfully to another ip phone, but i cannot transfer it to a phone connected on fxs port on the cme router.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

is it possible to transfer a voip call to fxs analog ?

Add transfer-pattern 1... under telephony-service.

Chris

4 REPLIES
Hall of Fame Super Silver

is it possible to transfer a voip call to fxs analog ?

Please post your config and provide the extension of the analog phone.

Chris

New Member

is it possible to transfer a voip call to fxs analog ?

interface FastEthernet0/0
  ip address 192.168.1.61 255.255.255.0
  duplex auto
  speed auto
!
interface Serial0/0
  no ip address
!
i

voice-port 2/0/0
  connection plar opx 3051
!
voice-port 2/0/1
!
voice-port 2/1/0
!
voice-port 2/1/1
!
dial-peer voice 1101 pots
  destination-pattern 1101
  port 2/1/0
!
dial-peer voice 1102 pots
  destination-pattern 1102
  port 2/1/1
!


telephony-service
  load 7912 CP7912080004SCCP080108A.sbin
  max-ephones 9
  max-dn 9
  ip source-address 192.168.1.61 port 2000
  auto assign 1 to 9
  max-conferences 8 gain -6
transfer-system full-consult
  create cnf-files version-stamp Jan 01 2002 00:00:00
!
!
ephone-dn  1
  number 3050
!
!
ephone-dn  2
  number 3051
!
!
ephone-dn  3
  number 3052
!
!
ephone  1
  device-security-mode none
  mac-address 0027.10CF.48D4
  type CIPC
  button  1:1
!
!
!
ephone  2
  device-security-mode none
  mac-address 0011.5C98.B7D0
  type 7912
  button  1:2
!
!
!
ephone  3
  no multicast-moh
  device-security-mode none
Hall of Fame Super Silver

is it possible to transfer a voip call to fxs analog ?

Add transfer-pattern 1... under telephony-service.

Chris

New Member

is it possible to transfer a voip call to fxs analog ?

great worked.

148
Views
0
Helpful
4
Replies
CreatePlease to create content