Is my router 3845, is hardware prepared for an E1 PSTN Link?
The IT department in one branch office is planning to connect one of the PSTN links from the Lecagy PBX to the VoIP Router, I would like to know people if my VoIP router is hardware prepared for that change. (I already know's the configuration).
NAME: "PVDMII DSP SIMM with four DSPs", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64 , VID: V01 ,
NAME: "High Density Voice2 Network module with on board two port interface ", DESCR: "High Density Voice2 Network module with on board two port interface " PID: NM-HDV2-2T1/E1 , VID: V04 ,
NAME: "2nd generation four port FXO voice interface daughtercard", DESCR: "2nd generation four port FXO voice interface daughtercard" PID: VIC2-4FXO , VID: V03 ,
NAME: "PVDMII DSP SIMM with three DSPs", DESCR: "PVDMII DSP SIMM with three DSPs" PID: PVDM2-48 , VID: V01 ,
NAME: "PVDMII DSP SIMM with one DSP with half channel capcity", DESCR: "PVDMII DSP SIMM with one DSP with half channel capcity" PID: PVDM2-8 , VID: V01 ,
Cisco IOS Software, 3800 Software (C3845-SPSERVICESK9-M), Version 12.4(25c), RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2010 by Cisco Systems, Inc. Compiled Fri 12-Feb-10 03:18 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T5, RELEASE SOFTWARE (fc1)
System returned to ROM by power-on System image file is "flash:c3845-spservicesk9-mz.124-25c.bin"
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
If you require further assistance please contact us by sending email to firstname.lastname@example.org.
Cisco 3845 (revision 1.0) with 743424K/43008K bytes of memory. Processor board ID FTX0953C2M9 2 Gigabit Ethernet interfaces 64 Serial interfaces 8 Channelized E1/PRI ports 4 Channelized (E1 or T1)/PRI ports 8 Voice FXO interfaces DRAM configuration is 64 bits wide with parity enabled. 479K bytes of NVRAM. 62720K bytes of ATA System CompactFlash (Read/Write)
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...