Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Is there a Door Phone / Door Entry system compatible with CME?

I have a customer is implementing CME but needs to support a door entry system. So you press a buzzer, this rings a phone or phones, you speak to the person and then press DTMF to open the door latch.

Is there a 3rd party product available which has been tested with CME?

Thanks,

Chris

5 REPLIES

Re: Is there a Door Phone / Door Entry system compatible with CM

Just about any 3rd party system that uses analog will work. You have to use an ATA device with CME. most of the systems simply plug into an analog connection

New Member

Re: Is there a Door Phone / Door Entry system compatible with CM

We've tried a Panasonic Door Entry system with the ATA (H.323) and it doesn't work. As the ATA doesn't support Pulse dialing and doesn't support supervisor disconnect.

We are going to test with a FXS port on a router but this isn't ideal.

Chris

New Member

Re: Is there a Door Phone / Door Entry system compatible with CM

New Member

Although this actual post is

Although this actual post is old, the question and topic is not. I think CyberData and Commend are the 2 best solutions for Cisco. CyberData for example carry direct certification. Commend offer a large range of Cisco IP Intercom Systems. Having installed them both, I think Cyberdata was a little easier. There was no need for an additional server. This saved us a little time. Although Cyberdata only offer audio intercoms. 

New Member

Re: Is there a Door Phone / Door Entry system compatible with CM

2609
Views
0
Helpful
5
Replies
CreatePlease login to create content