Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Is there a way to configure NFAS with MGCP or does it require an H323 gateway?

I am setting up a gateway that will connect to 5 PRIs set up on the telco side as NFAS.  

I was wondering if there was any way to bundle these in NFAS with MGCP or if I have to make this an H323 gateway.

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

No, NFAS is not supported

No, NFAS is not supported with MGCP. SIP or H323 is what you should be using. Assuming somewhat recent CUCM and IOS SIP would be preferred.

1 REPLY
Hall of Fame Super Silver

No, NFAS is not supported

No, NFAS is not supported with MGCP. SIP or H323 is what you should be using. Assuming somewhat recent CUCM and IOS SIP would be preferred.

29
Views
0
Helpful
1
Replies