Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISDN BRI outgoing/incoming call problem

Hi

I have the following setup:

Cisco 2621XM with NM-HD-2V and VIC2-2BRI-NT-TE

IOS 12.4(4)T

CallManager Express 3.3

2x ISDN NT connected to PSTN via BRI (in port 0).

I'm trying to achieve the following:

Outgoing calls work if dialed from phones

Incoming calls come in on hunt group (MSN numbers 4959 and 4283).

At present this is what I'm getting:

Outgoing call:

Jul 23 08:22:55.431: %ISDN-6-LAYER2UP: Layer 2 for Interface BR1/0, TEI 84 changed to up

Jul 23 08:22:55.439: ISDN BR1/0 Q931: TX -> SETUP pd = 8  callref = 0x0A

Bearer Capability i = 0x8090A2

Standard = CCITT

Transfer Capability = Speech 

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x81

Calling Party Number i = 0x0080, '5512'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x80, '073xxxxxxx'

Plan:Unknown, Type:Unknown

Jul 23 08:22:55.731: ISDN BR1/0 Q931: RX <- SETUP_ACK pd = 8  callref = 0x8A

Channel ID i = 0x89

Jul 23 08:22:55.735: ISDN BR1/0 **ERROR**: host_information: Unexpected INFO - call id 0x800A

Jul 23 08:22:57.371: ISDN BR1/0 Q931: RX <- DISCONNECT pd = 8  callref = 0x8A

Cause i = 0x8AFF - Interworking error; unspecified

Progress Ind i = 0x8288 - In-band info or appropriate now available

Jul 23 08:22:57.375: ISDN  SERROR: calltrkr_call_cleared: no idb, call failed

Jul 23 08:22:57.379: ISDN BR1/0 **ERROR**: host_disconnect: isdn_info NULL on Disconnect call id 0x800A

Jul 23 08:22:57.383: ISDN 540C08928170 Error: Invalid DSL (0)  SERROR: isdn_get_display_text_from_gtd: false ret

Jul 23 08:22:57.387: ISDN BR1/0 **ERROR**: host_disconnect_ack: Unfound B-channel on Disconnect_Ack call id 0x800A

Jul 23 08:22:57.391: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8  callref = 0x0A

Cause i = 0x80AF - Resource unavailable, unspecified

Jul 23 08:23:00.887: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR1/0, TEI 84 changed to down

Jul 23 08:23:00.887: ISDN BR1/0 Q931: Ux_DLRelInd: DL_REL_IND received from L2

Incoming call:

Jul 23 08:24:07.760: ISDN BR1/0 Q931: RX <- SETUP pd = 8  callref = 0x11

Sending Complete

Bearer Capability i = 0x9090A3

Standard = CCITT

Transfer Capability = 3.1kHz Audio

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x89

Progress Ind i = 0x8083 - Origination address is non-ISDN 

Calling Party Number i = 0x0183, '021xxxxxxx'

Plan:ISDN, Type:Unknown

Called Party Number i = 0x81, '4959'

Plan:ISDN, Type:Unknown

Jul 23 08:24:07.764: ISDN BR1/0 SERROR: L2_Go: at bailout DLCB is NULL

L2: sapi 0 tei 127 ces 0 ev 0x3

Jul 23 08:24:07.792: ISDN 7F356C40800B Error: Invalid DSL (0)  SERROR: isdn_get_display_text_from_gtd: false ret

Jul 23 08:24:07.796: ISDN 7F356C40800B Error: Invalid DSL (0)  Error: Invalid DSL (0)  SERROR: isdn_get_display_text_from_gtd: false ret

Jul 23 08:24:07.828: %ISDN-6-LAYER2UP: Layer 2 for Interface BR1/0, TEI 84 changed to up

Jul 23 08:24:07.832: ISDN BR1/0 Q931: TX -> CALL_PROC pd = 8  callref = 0x91

Channel ID i = 0x89

Jul 23 08:24:07.860: ISDN BR1/0 Q931: TX -> CONNECT pd = 8  callref = 0x91

Channel ID i = 0x89

Jul 23 08:24:08.200: ISDN BR1/0 Q931: RX <- CONNECT_ACK pd = 8  callref = 0x11

Jul 23 08:24:08.208: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 0218554283 N/A

Jul 23 08:24:11.296: ISDN BR1/0 Q931: RX <- DISCONNECT pd = 8  callref = 0x11

Cause i = 0x8090 - Normal call clearing

Progress Ind i = 0x8288 - In-band info or appropriate now available

Jul 23 08:24:11.304: %ISDN-6-DISCONNECT: Interface BRI1/0:1  disconnected from 0218554283 , call lasted 3 seconds

Jul 23 08:24:11.316: ISDN BR1/0 Q931: TX -> RELEASE pd = 8  callref = 0x91

Jul 23 08:24:11.460: ISDN BR1/0 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x11

Jul 23 08:24:13.460: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR1/0, TEI 84 changed to down

Jul 23 08:24:13.464: ISDN BR1/0 Q931: Ux_DLRelInd: DL_REL_IND received from L2

This is my current configuration:

Current configuration : 3475 bytes

!

! Last configuration change at 10:49:28 SAST Fri Jul 23 2010

! NVRAM config last updated at 10:34:13 SAST Fri Jul 23 2010

!

version 12.4

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

!

hostname voice

!

boot-start-marker

boot-end-marker

!

enable secret 5 xxxxxxxxxxxxxx

!

no aaa new-model

!

resource policy

!

clock timezone SAST 2

no network-clock-participate slot 1

no network-clock-participate wic 0

ip subnet-zero

ip cef

!

!

!

!

isdn switch-type basic-net3

voice-card 1

!

!

!

!

voice service voip

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

supplementary-service h450.12

h323

sip

  bind control source-interface FastEthernet0/0

  bind media source-interface FastEthernet0/0

  header-passing

  subscription maximum accept 5

  registrar server expires max 600 min 60

!

!

!

!

!

!

!

!

!

voice register global

mode cme

source-address 10.1.1.123 port 5060

authenticate all

timezone 29

!

voice register dn  9

number 5509

no-reg

!

voice register dn  10

number 5510

no-reg

!

voice register dn  11

number 5511

no-reg

!

voice register dn  12

number 5512

no-reg

!

voice register dn  13

number 5513

no-reg

!

voice register dn  60

number 5560

!

voice register dn  61

number 5561

!

voice register pool  1

id mac 000B.8218.6210

number 1 dn 9

max registrations 24

username 5509 password 5509

codec g711alaw

!

voice register pool  2

id mac 000B.8219.4241

number 1 dn 10

max registrations 24

username 5510 password 5510

codec g711alaw

!

voice register pool  3

id mac 000B.8218.9D96

number 1 dn 12

max registrations 24

username 5512 password 5512

codec g711alaw

!

voice hunt-group 1 longest-idle

final 5500

list 5512,5510,5511,5509,5513

timeout 180

hops 5

pilot 4959

!

!

voice hunt-group 2 longest-idle

final 5500

list 5512,5510,5511,5509,5513

timeout 180

hops 5

pilot 4283

!

!

!

!

!

!

username admin privilege 15 secret 5 xxxxxxxxxx

!

!

!

!

!

interface FastEthernet0/0

ip address 10.1.1.123 255.255.255.0

speed auto

half-duplex

no mop enabled

!

interface FastEthernet0/1

no ip address

shutdown

duplex auto

speed auto

!

interface BRI1/0

no ip address

isdn switch-type basic-net3

isdn point-to-point-setup

isdn incoming-voice voice

!

interface BRI1/1

no ip address

isdn switch-type basic-net3

isdn point-to-point-setup

isdn incoming-voice voice

!

ip classless

ip route 0.0.0.0 0.0.0.0 10.1.1.2

!

ip http server

ip http authentication local

no ip http secure-server

ip http path flash:

!

!

!

control-plane

!

!

!

voice-port 1/0/0

!

voice-port 1/0/1

!

!

!

!

!

dial-peer voice 1 pots

destination-pattern 0T

incoming called-number .T

port 1/0/0

forward-digits all

!

dial-peer voice 2 pots

destination-pattern 0T

!

!

!

!

dial-peer voice 1 pots

destination-pattern 0T

incoming called-number .T

port 1/0/0

forward-digits all

!

dial-peer voice 2 pots

destination-pattern 0T

incoming called-number .T

port 1/0/1

forward-digits all

!

dial-peer voice 3 voip

destination-pattern 5500

session protocol sipv2

session target ipv4:10.1.1.158

session transport tcp

dtmf-relay rtp-nte

!

!

telephony-service

max-ephones 24

max-dn 72

ip source-address 10.1.1.123 port 2000

create cnf-files version-stamp Jan 01 2002 00:00:00

voicemail 5500

max-conferences 4 gain -6

moh music-on-hold.au

transfer-system full-consult

transfer-pattern 5...

!

!

line con 0

line aux 0

line vty 0 4

password 7 xxxxxxxxxxxx

login

transport input all

!

ntp clock-period 17180178

ntp server 196.25.1.1

!

end

Would someone please be so kind as to assist me with this problem?

Kind regards,

Lionel

2 REPLIES
New Member

Re: ISDN BRI outgoing/incoming call problem

Just to add - internals calls are working fine.

New Member

ISDN BRI outgoing/incoming call problem

Hi Guys,

Just want to check if you ressolved the issue? because i am having same issue.

3159
Views
0
Helpful
2
Replies