Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISDN BRI problem

I have 4 port ISDN BRI and the configuration follow attache. I try to call between site and the ISDN BRI its work only 3 port of 4 port. Currently ISDN working I use command "debug dialer" and test call by command

"isdn test call interface bri 0/0/2 073224017"

the debug show like this

==================================

AAA#isdn test call interface brI 0/0/2 073224017

AAA#

*Jul 17 09:51:43.771: BR0/0/2 DDR: Attempting to dial 073224017

AAA#

*Jul 17 09:51:52.695: BRI0/0/2: wait for isdn carrier timeout, call id=0x8276

AAA#

*Jul 17 09:51:58.499: BR0/0/2 DDR: rotor dialout [best] least recent failure is also most recent failure

*Jul 17 09:51:58.499: BR0/0/2 DDR: rotor dialout [best] also has most recent failure

*Jul 17 09:51:58.499: BR0/0/2 DDR: rotor dialout [best]

*Jul 17 09:51:58.499: BR0/0/2 DDR: Attempting to dial 1899

*Jul 17 09:51:58.839: BRI0/0/2: wait for isdn carrier timeout, call id=0x8277

AAA#

*Jul 17 09:52:28.499: BR0/0/2 DDR: rotor dialout [best] least recent failure is also most recent failure

*Jul 17 09:52:28.499: BR0/0/2 DDR: rotor dialout [best] also has most recent failure

*Jul 17 09:52:28.499: BR0/0/2 DDR: rotor dialout [best]

*Jul 17 09:52:28.499: BR0/0/2 DDR: Attempting to dial 1899

*Jul 17 09:52:28.899: BRI0/0/2: wait for isdn carrier timeout, call id=0x8278

======================================

Please advise,How can I make ISDN work fully 4 port.

1 REPLY
New Member

Re: ISDN BRI problem

When I debug isdn q931 then use "isdn test call interface bri 0/0/2 073224017"

=======================================

AAA#isdn test call interface bri 0/0/2 073224017

AAA#

*Jul 17 10:27:28.871: ISDN BR0/0/2 Q931: RX <- DISCONNECT pd = 8 callref = 0xC3

Cause i = 0x829F - Normal, unspecified

*Jul 17 10:27:28.875: ISDN BR0/0/2 Q931: TX -> RELEASE pd = 8 callref = 0x43

Cause i = 0x809F - Normal, unspecified

*Jul 17 10:27:28.919: ISDN BR0/0/2 Q931: RX <- RELEASE_COMP pd = 8 callref = 0xC3

*Jul 17 10:27:29.595: ISDN BR0/0/2 Q931: Sending SETUP callref = 0x0044 callID = 0x82BF switch = basic-net3 interface = User

AAA#

*Jul 17 10:27:29.599: ISDN BR0/0/2 Q931: TX -> SETUP pd = 8 callref = 0x44

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x81

Preferred, B1

Called Party Number i = 0x80, '073224017'

Plan:Unknown, Type:Unknown

*Jul 17 10:27:29.647: ISDN BR0/0/2 Q931: RX <- CALL_PROC pd = 8 callref = 0xC4

Channel ID i = 0x89

Exclusive, B1

AAA#

*Jul 17 10:27:38.543: ISDN BR0/0/2 Q931: RX <- DISCONNECT pd = 8 callref = 0xC4

Cause i = 0x8492 - No user responding

*Jul 17 10:27:38.547: ISDN BR0/0/2 Q931: TX -> RELEASE pd = 8 callref = 0x44

Cause i = 0x8092 - No user responding

*Jul 17 10:27:38.591: ISDN BR0/0/2 Q931: RX <- RELEASE_COMP pd = 8 callref = 0xC4

=======================================

PS. the number 1899 its just a huntgroup of 4 ISDN telephone number that I have.

779
Views
0
Helpful
1
Replies