Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISDN BRI type for Luxembourg

Hi,

I have been tasked with setting up a remote office in Luxembourg running a H323 SRST gateway off CCM back in the U.K.. This has a BRI connection to the PSTN and Internet Via Ethernet connected to it. (As I will only have remote access to this and will not be in Luxembourg to fit it, I would like to get it correct first time)

Please could someone advise if the ISDN switch type should be basic-net3 (Europe) or VN3 (France). I am guessing basic-net3 is the one. Google has let me down!.

Also I have noticed that there is no Locale for Lux.. would the Frence or German one be expected for Tones?

Any other info that someone thinks is relevant would be much appreciated

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: ISDN BRI type for Luxembourg

net3 like everywhere else, including France.

BRI does not use tones and their configuration is irrelevant.

3 REPLIES
Hall of Fame Super Gold

Re: ISDN BRI type for Luxembourg

net3 like everywhere else, including France.

BRI does not use tones and their configuration is irrelevant.

New Member

Re: ISDN BRI type for Luxembourg

many thanks for the response, however the locals I need to install are on the CallManager

Hall of Fame Super Gold

Re: ISDN BRI type for Luxembourg

They speak three languages there, so check their preferences.

Thank you for the nice rating, and good luck.

439
Views
0
Helpful
3
Replies