I had a similar issue and you may need to upgrade the IOS on the router. I had this issue before and as it turned out, the VIC2 card was a second generation card and the router's IOS did not support 2nd generation cards. YOu may want to look that up.
Sorry but what did you mean by you may need to upgrade the IOS on the router?
so to sum what you said i can use it for PRI in the event if i upgrade the IOS but the card has the Name BRI so it's only usable for BRI connection not PRI thanks for replying soon i need this kind of information :)
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...