Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISDN Disconnect Problem

Hi,

I have implemented a 2821 VG with 2 E1's PRI, i have a problem with some channels in one of the E1's.

these channels drop the call immediately with Disconnect Cause no resource (47).

I make some debugs and the error when the call is disconnected is

Aug 26 23:59:01.014: ISDN Se1/1:15 EVENTd: process_pri_simple: msg 118, call id 0x804C, bchan 28, call type VOICE

Aug 26 23:59:01.014: ISDN Se1/1:15 SERROR: process_pri_simple: NO name in GTD

Aug 26 23:59:01.014: ISDN Se1/1:15 EVENTd: Packet to CC Data

Aug 26 23:59:01.014: 760101804C00080280AF

a complete debug output for

debug isdn q931

debug isdn q931 detail

debug isdn event

debug isdn event detail

debug isdn error

debug voip ccapi error

debug voip ccapi detail

debug gtd error

debug gtd detail

for the failed call is attached.

The IOS image is C2800NM-ADVIPSERVICESK9-M), Version 12.4(24)T

can you please help me on this. why these channels dropping the call?

Regards,

Abbas

1 ACCEPTED SOLUTION

Accepted Solutions

Re: ISDN Disconnect Problem

Hi Abbas,

You may be hitting this bug:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsx67255

What happens is if you have an allocation failure, any future calls over that channel also fail with the same error code.

Check the bottom line of 'show voice dsp group all' to see if you've had any allocation failures.

hth,

nick

4 REPLIES
New Member

Re: ISDN Disconnect Problem

Hi,

It sounds like a DSP issue, have you checked your DSP`s...if you like you could post a show run...

New Member

Re: ISDN Disconnect Problem

Hi

I checked the dsp but every thing looks ok

there is 64 PVDM2 on this router and two E1's.

Attached is the show run

Re: ISDN Disconnect Problem

Hi Abbas,

You may be hitting this bug:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsx67255

What happens is if you have an allocation failure, any future calls over that channel also fail with the same error code.

Check the bottom line of 'show voice dsp group all' to see if you've had any allocation failures.

hth,

nick

New Member

Re: ISDN Disconnect Problem

Hi nick,

Thanks for your post. it was extremely Helpful.

it seems i am hitting the bug i do show voice dsp groups all. and i got "1 DSP resource allocation failure"

So i will try to upgrade to one of the known fixed-IN IOS. and check.

i will let you know if this solve the problem.

Thanks again

607
Views
0
Helpful
4
Replies
CreatePlease login to create content