Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ISDN Errror messages.

HI,

I have errors in my c2821 gateway that I do not understand. Can somebody please explain this errors to me. I have search around but have not found any answer.

200722: Nov 26 13:06:43.961: ISDN Se0/0/1:15 SERROR: process_pri_simple: NO name

in GTD

200723: Nov 26 13:06:43.961: ISDN **ERROR**: Module-CCPQSIG Function-CCPQSIG_C

allConnected Error-Unknown event 0x58

200724: Nov 26 13:06:46.621: ISDN Se0/0/1:15 SERROR: process_pri_simple: NO name

in GTD

200725: Nov 26 13:06:46.625: ISDN **ERROR**: Module-CCPQSIG Function-CCPQSIG_C

allConnected Error-Unknown event 0x58

Regards

Per

6 REPLIES
Bronze

Re: ISDN Errror messages.

It seems the application was trying to send INFO message after the connection already established. Coul dyou provide the details of these debugs:

debug isdn q931

debug isdn q931 detail

debug isdn event

debug isdn event detail

Community Member

Re: ISDN Errror messages.

HI,

This is a part of my debug output. It did not helped me to understund the *ERROR* and SERROR messages.

Q931d: L3_state_change: callref 0xA

426 old RELEASE_REQUEST, new NULL_STATE

471126: Dec 4 14:22:16.388: ISDN Se0/0/0:15 Q931d: CC_CHAN_GetUserpri: using ca

ll_id = 0x3BC1

471127: Dec 4 14:22:16.388: ISDN EVENTd: cc_clear_free_list freed 0x669083B8

471128: Dec 4 14:22:16.388: ISDN Se0/0/0:15 EVENT: process_rxstate: ces/callid

1/0x3BC1 calltype 2 CALL_CLEARED

471129: Dec 4 14:22:16.388: ISDN Se0/0/0:15 EVENTd: calltrkr_call_cleared: isdn

_info=0x663E2650, call_id=0x3BC1

471130: Dec 4 14:22:16.388: ISDN Se0/0/0:15 EVENTd: calltrkr_call_cleared: isdn

_info=0x66429910, call_id=0x3BC1

471131: Dec 4 14:22:16.388: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, Connec

tionId F95AA93E A1AA11DC BBC10012 80132C20, SetupTime 15:21:01.428 met Tue Dec 4

2007, PeerAddress 702969152, PeerSubAddress , DisconnectCause 10 , DisconnectT

ext normal call clearing (16), ConnectTime 15:21:06.008 met Tue Dec 4 2007, Disc

onnectTime 15:22:16.328 met Tue Dec 4 2007, CallOrigin 2, ChargedUnits 0, InfoTy

pe 2, TransmitPackets 3514, TransmitBytes 590352, ReceivePackets 3515, ReceiveBy

tes 562400

471132: Dec 4 14:22:16.832: ISDN Se0/0/1:15 EVENTd: process_pri_simple: msg 88,

call id 0xE755, bchan 16, call type VOICE

471133: Dec 4 14:22:16.832: ISDN Se0/0/1:15 SERROR: process_pri_simple: NO name

in GTD

471134: Dec 4 14:22:16.832: ISDN Se0/0/1:15 EVENTd: process_pri_simple: Packet

to CC Data: 58 1 1 E7 55 0

471135: Dec 4 14:22:16.832: ISDN **ERROR**: Module-CCPQSIG Function-CCPQSIG_C

allConnected Error-Unknown event 0x58

471136: Dec 4 14:22:16.988: ISDN Se0/0/1:15 Q931: RX <- SETUP pd = 8 callref =

0x064B

Bearer Capability i = 0x9090A3

Standard = CCITT

Transfer Capability = 3.1kHz Audio

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA18381

Preferred, Channel 1

Progress Ind i = 0x8583 - Origination address is non-ISDN

Progress Ind i = 0xA190 - Reserved value

Calling Party Number i = 0x1181, '34935140900'

Plan:ISDN, Type:International

Called Party Number i = 0xC9, '77277'

Plan:Private, Type:Subscriber(local)

User-User i = 0x00FE, 'U', 0x0100, 'Y', 0x0100B4

Shift to Codeset 5

Codeset 5 IE 0x31 i = 0x81

Shift to Codeset 5

Codeset 5 IE 0x32 i = 0x80

471137: Dec 4 14:22:16.988: ISDN Se0/0/1:15 Q931d: L3IF_rx_L2_pak: received dat

a

471138: Dec 4 14:22:16.988: 0802064B0504039090A31803A183811E

471139: Dec 4 14:22:16.988: 0285831E02A1906C0D11813334393335

471140: Dec 4 14:22:16.988: 3134303930307006C937373237377E09

471141: Dec 4 14:22:16.988: 00FE550100590100B49D3101819D3201

471142: Dec 4 14:22:16.988: 80

471143: Dec 4 14:22:16.988: ISDN Se0/0/1:15 Q931d: L3_Go: source = 0x20A, event

= 0x5, call id = 0x0, int id = 0x0

471144: Dec 4 14:22:16.988: ISDN Se0/0/1:15 Q931d: L3_Go: event 0x5 cr_len 2 c

r 34379

471145: Dec 4 14:22:16.988: ISDN Se0/0/1:15 Q931d: L3_state_change: callref 0x0

000 old UNKNOWN_STATE, new NULL_STATE

471146: Dec 4 14:22:16.988: ISDN Se0/0/1:15 Q931d: L3_Go: call_id 0x0 cr 0x864B

state 0 event 0x5 ces 1

471147: Dec 4 14:22:16.988: ISDN Se0/0/1:15 Q931d: L3_ProcessEvent: callref = 0

x864B SETUP:U0_Setup(nlcb)

471148: Dec 4 14:22:16.988: ISDN Se0/0/1:15 Q931d: L3_state_change: callref 0x0

000 old NULL_STATE, new UNKNOWN_STATE

471149: Dec 4 14:22:16.988: ISDN Se0/0/1:15 EVENT: process_rxstate: ces/callid

1/0x3BC4 calltype 2 CALL_INCOMING

471150: Dec 4 14:22:16.988: ISDN Se0/0/1:15 EVENTd: isdn_get_guid: Got Guid 266

4AAE9BBC4

471151: Dec 4 14:22:16.988: ISDN Se0/0/1:15 EVENT: call_incoming: call_id 0x3BC

4, Guid = 2664AAE9BBC4

Community Member

Re: ISDN Errror messages.

You should use a graphical tool to look at your debugs, like the pri debugger at pippinsoftware.com - you can download the demo for free, the full version comes out in Jan '08

Community Member

Re: ISDN Errror messages.

The first beta of this PRI debugger had some issues, there's a revised beta posted at pippinsoftware.com now.

Re: ISDN Errror messages.

aqnyone ever figure out the solution, I have these error's now, and I think this is my problem!

Cheers,

Chad

Community Member

Re: ISDN Errror messages.

hi,

Can you get me the outputs of

debug isdn q931

debug isdn events

After enabling the mentioned debug commands,you need to fire the isdn number by using the below command

isdn test call int bri x/x/x

fire this command twice and capture the logs and output of

sh is st

sh is ac

sh call history

Thanks

Siva

702
Views
0
Helpful
6
Replies
CreatePlease to create content