Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

ISDN PRI is not working with CISCO 3845 router

Hi,

I have configured the 3845 router for IDSN termiantion, but I could not get calls or take out goign calls. I am getting error as " temporary failure (41)" when I run show call history voice brief.  Also I am running CME on the same router.

Any hints to resolve this...

Thx

Neethan

1 REPLY

Re: ISDN PRI is not working with CISCO 3845 router

Hi Neethan,

Please confirm the below points:

1. Check the incoming and outgoing is enabled at ISP side

2. Check the ISDN status on router

Use the following command to check the ISDN Status:

Router# show isdn status

3. Check the DSP resources on router

Use the following command to check the DSP resources:

Router# show diag

Router# show inventory

4. Check the current IOS for any bugs.

Use the following command to debug the ISDN calls:

Router# debug isdn q931

Please send the output of both the commands to find out the root cause of the issue (If possible the Router configuration as well).

-

Vaijanath

Thanks,
Vaijanath S.

-----------------------------

Please rate if this information is useful.
450
Views
0
Helpful
1
Replies
CreatePlease to create content