ISDN Switch type GTD5

[markcarat]

Hello,

I need some help here.  I am going to install a MGCP gateway ( Cisco 2911 ISR) at a remote site in Vancouver, Canada.  They have a PRI and the switch type is GTD5, ISDN protocol is NI2.  Does Cisco support GTD5?  If no, what is my option?

Any input is appreciated.

Thanks

Mark

[t.s.davis · Accepted solution]

If they have the PRI configured as NI2, you should be able to use 'isdn switch-type primary-ni' regardless of what the actual switch is.

[markcarat]

Thank you.  I will give it a shoot..

[paolo bevilacqua]

Before configuring MGCP, think twice, as that will impose major limitations, configuration overhead, and potential instability.

The alternative is to use H.323 or SIP instead.

[markcarat]

Hi Paolo, I hear you but I do not have other option, we have 10 remote sites and they are all using MGCP.

Thanks