Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISDN Switch type GTD5

Hello,

I need some help here.  I am going to install a MGCP gateway ( Cisco 2911 ISR) at a remote site in Vancouver, Canada.  They have a PRI and the switch type is GTD5, ISDN protocol is NI2.  Does Cisco support GTD5?  If no, what is my option?

Any input is appreciated.

Thanks

Mark

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

ISDN Switch type GTD5

If they have the PRI configured as NI2, you should be able to use 'isdn switch-type primary-ni' regardless of what the actual switch is.

4 REPLIES
New Member

ISDN Switch type GTD5

If they have the PRI configured as NI2, you should be able to use 'isdn switch-type primary-ni' regardless of what the actual switch is.

New Member

ISDN Switch type GTD5

Thank you.  I will give it a shoot..

Hall of Fame Super Gold

ISDN Switch type GTD5

Before configuring MGCP, think twice, as that will impose major limitations, configuration overhead, and potential instability.

The alternative is to use H.323 or SIP instead.

New Member

ISDN Switch type GTD5

Hi Paolo, I hear you but I do not have other option, we have 10 remote sites and they are all using MGCP.

Thanks

752
Views
0
Helpful
4
Replies
CreatePlease login to create content