Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

isdn switch-type ?

Quick question: If a PRI has been ordered and provisioned to use ISDN protocol "NI-1" what does this correspond to when configuring the "isdn switch-type ????" command on the PRI?

Do I use "isdn switch-type primary-ni"?

TIA for any assistance

2 REPLIES
Silver

Re: isdn switch-type ?

Hi, according to this document there is no NI-1 standard for PRI only for BRI!

http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a0080093d6d.shtml

Might be worth checking with your telco what has been provisioned again.

If it is a PRI it may just be a typo with the 1 and you would configure isdn switch-type primary-ni

If its a BRI you would configure isdn switch-type basic-ni.

HTH

New Member

Re: isdn switch-type ?

Thought it was odd. Thanks very much!

554
Views
10
Helpful
2
Replies