12-17-2011 12:43 AM - edited 03-16-2019 08:35 AM
I have the following router
Cisco CISCO2901
flash0:c2900-universalk9-mz.SPA.151-4.M2.bin
containing the following CUE inbuilt
1 Internal Services Module (ISM) with Services Ready Engine (SRE)
PID: ISM-SRE-300-K9
I want to install the software for this Cue card. 2 quickquestion
which will be the software to be installed on router? I have cue-installer.ise.8.5.1 and cue-installer.sme.8.5.1
How to install software on the router (other than ftp)
Solved! Go to Solution.
12-19-2011 12:37 AM
Hi,
cue-installer.ise.8.5.1 is for Integrated Service Engine and cue-installer.sme.8.5.1 for Services Ready Engine. As your hardware is SME you should use the cue-installer.sme.8.5.1.
Following is the procedure
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel8_5/install/installsre.html
regards
Ronak patel
12-19-2011 12:03 AM
Download software from csico.com, and follow the installation documentation.
12-19-2011 12:37 AM
Hi,
cue-installer.ise.8.5.1 is for Integrated Service Engine and cue-installer.sme.8.5.1 for Services Ready Engine. As your hardware is SME you should use the cue-installer.sme.8.5.1.
Following is the procedure
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel8_5/install/installsre.html
regards
Ronak patel
12-19-2011 02:10 AM
Ya i did it already. I nailed it.
Can you tell me the diff between ISE and SME ? Thanks
12-19-2011 02:47 AM
Hi
Below is the difference
For the ISM-SRE-300-K9, enter:
interface ism slot/unit
For the SM-SRE-700-K9 and SM-SRE-900-K9, enter:
interface sm slot/0
For the NME-CUE, enter:
interface integrated-service-engine slot/unit
For the AIM2-CUE, enter:
interface internal-service-module slot/unit
They are just an Different type of hardware.
regards
Ronak patel
04-25-2018 06:04 AM
Hi
Could send us the link for downloading
All regards,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: