Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ISM-SRE-300-K9 - Software installation

I have the following router

Cisco CISCO2901

flash0:c2900-universalk9-mz.SPA.151-4.M2.bin

containing the following CUE inbuilt

1 Internal Services Module (ISM) with Services Ready Engine (SRE)

PID: ISM-SRE-300-K9

I want to install the software for this Cue card. 2 quickquestion

which will be the software to be installed on router? I have cue-installer.ise.8.5.1 and cue-installer.sme.8.5.1

How to install software on the router (other than ftp)

1 ACCEPTED SOLUTION

Accepted Solutions
Blue

ISM-SRE-300-K9 - Software installation

Hi,

cue-installer.ise.8.5.1 is for Integrated Service Engine and cue-installer.sme.8.5.1 for Services Ready Engine. As your hardware is SME you should use the cue-installer.sme.8.5.1.

Following is the procedure

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel8_5/install/installsre.html

regards

Ronak patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
4 REPLIES
Hall of Fame Super Gold

ISM-SRE-300-K9 - Software installation

Download software from csico.com, and follow the installation documentation.

Blue

ISM-SRE-300-K9 - Software installation

Hi,

cue-installer.ise.8.5.1 is for Integrated Service Engine and cue-installer.sme.8.5.1 for Services Ready Engine. As your hardware is SME you should use the cue-installer.sme.8.5.1.

Following is the procedure

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel8_5/install/installsre.html

regards

Ronak patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
New Member

ISM-SRE-300-K9 - Software installation

Ya i did it already. I nailed it.

Can you tell me the diff between ISE and SME ? Thanks

Blue

ISM-SRE-300-K9 - Software installation

Hi

Below is the difference

For the ISM-SRE-300-K9, enter:

interface ism slot/unit

For the SM-SRE-700-K9 and SM-SRE-900-K9, enter:

interface sm slot/0

For the NME-CUE, enter:

interface integrated-service-engine slot/unit

For the AIM2-CUE, enter:

interface internal-service-module slot/unit

They are just an Different type of hardware.

regards

Ronak patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
4766
Views
5
Helpful
4
Replies