I'm having an issue adding a 2nd PRI. I'm guessing it's something obvious and I'm hoping a fresh pair of eyes can pick out the issue. The PRI on 0/0/0 works fine but the PRI on 0/0/1 continually flips between AWAITING_ESTABLISHMENT and TEI_ASSIGNED. Here are the relevant parts of the config along with the "sh isdn status". I ran the "sh isdn status" twice to show it in both states.
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname PRI-GW
!
!
card type t1 0 0
!
no aaa new-model
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
network-clock-select 2 T1 0/0/1
!
isdn switch-type primary-ni
!
!
voice-card 0
!
!
!
voice translation-rule 1
rule 1 /55555\(.....\)/ /\1/
!
!
voice translation-profile STRIP
translate called 1
!
!
!
hw-module pvdm 0/0
!
!
!
controller T1 0/0/0
cablelength long 0db
pri-group timeslots 1-24
!
controller T1 0/0/1
cablelength long 0db
pri-group timeslots 1-24
!
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
isdn outgoing display-ie
no cdp enable
!
interface Serial0/0/1:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
isdn outgoing display-ie
no cdp enable
!
!
voice-port 0/0/0:23
translation-profile incoming STRIP
!
voice-port 0/0/1:23
translation-profile incoming STRIP
!
----------------------------------------------------
Show ISDN Status:
PRI-GW#sh isdn status
Global ISDN Switchtype = primary-ni
ISDN Serial0/0/0:23 interface
dsl 0, interface ISDN Switchtype = primary-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
2 Active Layer 3 Call(s)
CCB:callid=286D, sapi=0, ces=0, B-chan=1, calltype=VOICE
CCB:callid=286F, sapi=0, ces=0, B-chan=2, calltype=VOICE
Active dsl 0 CCBs = 2
The Free Channel Mask: 0x807FFFFC
Number of L2 Discards = 0, L2 Session ID = 1
ISDN Serial0/0/1:23 interface
dsl 1, interface ISDN Switchtype = primary-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = AWAITING_ESTABLISHMENT
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 1 CCBs = 0
The Free Channel Mask: 0x807FFFFF
Number of L2 Discards = 0, L2 Session ID = 146
Total Allocated ISDN CCBs = 2
PRI-GW#sh isdn status
Global ISDN Switchtype = primary-ni
ISDN Serial0/0/0:23 interface
dsl 0, interface ISDN Switchtype = primary-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
2 Active Layer 3 Call(s)
CCB:callid=286D, sapi=0, ces=0, B-chan=1, calltype=VOICE
CCB:callid=286F, sapi=0, ces=0, B-chan=2, calltype=VOICE
CCB:callid=2870, sapi=0, ces=0, B-chan=3, calltype=VOICE
Active dsl 0 CCBs = 3
The Free Channel Mask: 0x807FFFF8
Number of L2 Discards = 0, L2 Session ID = 1
ISDN Serial0/0/1:23 interface
dsl 1, interface ISDN Switchtype = primary-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 1 CCBs = 0
The Free Channel Mask: 0x807FFFFF
Number of L2 Discards = 0, L2 Session ID = 147
Total Allocated ISDN CCBs = 3
