that is target to a 10.240.140.X (this gateway is connected to a pbx siemens for the extensions 513XX and have all dialpeers, i`m openning a new office and i want to translate a few extension 51345-88 to a callmanager 6. when i created a trunk to comunicate with the gatekeeper and put the prefix 513, any calls in the range of 513XX enter to a pbx siemens or callmanager, i try with more especific prefix like 5134 but it doesn`t create becouse the 513 is more granted.what can i do?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...